TR-SLOPE-S Low Profile Wheel Ramps: Jack Access for Lowered Cars
The Tomioka Racing TR-SLOPE-S is a compact low clearance service ramp that provides 65mm (2.56") of lift to help a floor jack reach lowered-car jack points. Each pair includes 2 black ramps and costs $60.
A lowered car can stop a service job before the first fastener comes loose. The jack will not pass beneath the sill, or its saddle cannot reach the designated lifting point without contacting an undertray. Modern flat floors and limited ground clearance make the approach as important as the lifting point itself.
Why 65mm of lift matters for jack access
Once the tires are on the platform, usable lift determines the clearance available for positioning the jack. Ramp length primarily affects the approach and the space occupied around the vehicle. For service work, additional length does not automatically provide additional working clearance.
The TR-SLOPE-S has an overall height of 80mm (3.15"), but its lift height is 65mm (2.56"). These are different measurements: overall height is not the amount added beneath the tires.
That 65mm rise can resolve the clearance shortage preventing a jack from reaching its point. Check the entire jack path, including its chassis and saddle adapter. Raising one axle also pitches the vehicle, so every jack point does not automatically gain the full 65mm. Actual access depends on vehicle geometry.
TR-SLOPE-S specifications
| Specification | Detail |
|---|---|
| SKU | TR-SLOPE-S |
| Length | 445mm (17.5") |
| Width | 250mm (10") |
| Overall height | 80mm (3.15") |
| Lift height | 65mm (2.56") |
| Platform width | 250mm (10") |
| Material | Heavy-duty polypropylene |
| Reinforcement | Reinforced honeycomb structure |
| Base | Anti-slip pads |
| Color | Black |
| Quantity | Pair of 2 ramps |
| Price | $60 per pair |
Source: Tomioka Racing TR-SLOPE-S product specifications.
Why the honeycomb structure matters
A tire applies force through its contact patch. The ramp must transfer that load through its structure to the floor while limiting bending beneath the tire.
The engineering principle behind honeycomb reinforcement is to distribute material into interconnected supporting walls. These shorten unsupported spans, spread the tire load through multiple paths, and resist flex without requiring a solid block of material. That arrangement supports a high strength-to-weight ratio.
The heavy-duty polypropylene and reinforced geometry work together to carry the load efficiently. Lightweight handling makes the ramps practical to carry between storage, the garage, and track-day equipment.
What to compare when choosing ramps for lowered cars
Start with the job. A loading ramp manages vehicle approach through a transition. A maintenance ramp creates access while preserving working space. The original Tomioka Racing Super Slopes use a longer, low-angle format for smooth loading and trailer transitions; the shortened SLOPE-S is designed for compact garage maintenance.
| Option | Purpose | Garage consideration |
|---|---|---|
| TR-SLOPE-S | Compact maintenance and floor jack access | 445mm length; 65mm lift |
| Original Super Slopes | Low-angle loading and trailer transitions | Longer approach format |
| Long steel ramps | Vehicle elevation for access | Length occupies storage and working space |
| Wood blocks | Improvised tire elevation | Potential splitting, slipping, and uneven lift |
| Vehicle lift | Raised vehicle access | Most home garages do not have one |
The SLOPE-S addresses the initial jack-access problem with matched ramp geometry and a compact footprint. Check bumper and splitter clearance before driving onto any ramp.
Why wide platforms matter for EVs
Battery-electric cars often combine substantial mass with low, flat undersides and restricted lifting locations. A jack must reach an approved point without loading the battery enclosure or surrounding panels.
The 250mm (10") platform gives a correctly centered tire a broad support surface. Proper tire support and stable placement matter when positioning a heavy vehicle. Width alone does not establish load capacity; confirm the ramps' suitability for the particular vehicle before use.
Where low profile wheel ramps help during service
For oil changes, the ramps can establish jack access before the vehicle is raised and supported for undertray, drain-plug, or filter access. Follow the vehicle's required attitude for draining and checking oil.
Brake service, suspension work, and wheel and tire service require lifting the wheels clear. The ramps facilitate the first step: getting the jack into position. Jack stands then support the vehicle for the work.
For detailing, the initial elevation can improve access around lower bodywork. During track-day prep, the same setup helps start wheel removal, brake inspection, and suspension checks. Compact storage makes the pair practical to pack alongside the jack.
Frequently asked questions
How much lift do TR-SLOPE-S ramps provide?
65mm (2.56"). The 80mm (3.15") measurement is overall ramp height.
Will TR-SLOPE-S ramps fit wide tires?
The platform is 250mm (10") wide. Confirm your actual tire footprint fits the supported area; nominal tire size alone does not establish fit.
Are TR-SLOPE-S ramps safe on smooth garage floors?
Anti-slip pads help resist movement. The floor and pads must be clean and dry; stop if either ramp shifts.
What is the difference between SLOPE-S and original Super Slopes?
SLOPE-S provides compact garage maintenance access. The original Super Slopes address longer, low-angle loading and trailer transitions.
The TR-SLOPE-S is a garage essential for lowered and performance cars, available on the Tomioka Racing website for $60 a pair.
Comments