TR DCBB S55 Twin Turbo Kit with Exhaust Manifold & Intake Pipes for BMW F8X M2 Competition / M3 / M4 - 800HP+ Capable (TR-TW2008)
SKU - TR-TW2008
High-efficiency twin-turbo upgrade for S55-powered BMW F8X applications. Built to improve airflow, reduce backpressure, and support stronger response with a dual-ceramic ball bearing design, matched manifold, and front/rear compressor intake pipes. Designed for builds targeting 800+ HP with the right fuel, calibration, and supporting modifications.
- Fits S55-powered F8X models only
- Includes both turbochargers, manifold, intake pipes, oil/water lines, gaskets, and hardware
- Dual-ceramic ball bearing design for faster spool and improved transient response
- 800+ HP capability depending on fuel, calibration, and supporting mods
- Designed to improve airflow and minimize backpressure
Vehicle Fitment
Fits S55-powered models
- BMW F80 M3
- BMW F82 M4
- BMW F83 M4 Convertible
- BMW F87 M2 Competition
- BMW F87 M2 CS
Does NOT fit
- BMW F87 M2 with N55
- BMW G87 M2 with S58
Important: This is an S55-specific kit. Confirm chassis and engine before ordering.
Why Choose the TR S55 Twin Turbo Kit
- Supports builds targeting 800+ HP
- Designed to enhance airflow and minimize backpressure
- Dual-ceramic ball bearing design for faster spool and improved transient response
- High-flow 9-blade turbine wheel
- Larger A/R housing matched for increased airflow demand
- High-temperature manifold coating for durability
- Built for responsive, performance-focused driving conditions
- Complete hardware package for a cleaner upgrade path
What’s Included
- Turbochargers
- Exhaust Manifold
- Actuator
- Gaskets
- Oil Pipe
- Water Pipe
- Hardware Kits
- 1 x Turbo Compressor Intake Pipe (Front)
- 1 x Turbo Compressor Intake Pipe (Rear)
Technical Specifications
Part Number: TR-TW2008
Max Power: 800+ HP
Bearing Type: Ball Bearing
Turbine Housing: 10 cm²
Compressor Wheel: 47.0 mm / 58.0 mm
Turbine Wheel: 45.6 mm / 50.0 mm
Power & Setup Note
Power results depend on fuel, calibration, and supporting hardware. The 800+ HP figure reflects capability potential, not a guaranteed result on every vehicle.
For best conversion, add your dyno graph, fuel used, and full supporting-mod list directly below this section.
FAQ
Does this fit the standard F87 M2?
No. This kit is for S55-powered applications only.
Does this fit the F87 M2 Competition?
Yes. The F87 M2 Competition uses the S55 engine.
Does this fit the G87 M2?
No. The G87 M2 uses the S58 engine.
What is included in the kit?
Turbochargers, exhaust manifold, actuator, gaskets, oil pipe, water pipe, hardware kits, and front/rear compressor intake pipes.
How much power can it support?
This kit is designed for builds targeting 800+ HP, depending on setup, fuel, tuning, and supporting modifications.
Built for S55-powered F8X BMWs
Clear fitment. Complete hardware package. 800+ HP-capable twin-turbo upgrade.
High-efficiency twin-turbo upgrade for S55-powered BMW F8X applications. Built to improve airflow, reduce backpressure, and support stronger response with a dual-ceramic ball bearing design, matched manifold, and front/rear compressor intake pipes. Designed for builds targeting 800+ HP with the right fuel, calibration, and supporting modifications.
- Fits S55-powered F8X models only
- Includes both turbochargers, manifold, intake pipes, oil/water lines, gaskets, and hardware
- Dual-ceramic ball bearing design for faster spool and improved transient response
- 800+ HP capability depending on fuel, calibration, and supporting mods
- Designed to improve airflow and minimize backpressure
Vehicle Fitment
Fits S55-powered models
- BMW F80 M3
- BMW F82 M4
- BMW F83 M4 Convertible
- BMW F87 M2 Competition
- BMW F87 M2 CS
Does NOT fit
- BMW F87 M2 with N55
- BMW G87 M2 with S58
Important: This is an S55-specific kit. Confirm chassis and engine before ordering.
Why Choose the TR S55 Twin Turbo Kit
- Supports builds targeting 800+ HP
- Designed to enhance airflow and minimize backpressure
- Dual-ceramic ball bearing design for faster spool and improved transient response
- High-flow 9-blade turbine wheel
- Larger A/R housing matched for increased airflow demand
- High-temperature manifold coating for durability
- Built for responsive, performance-focused driving conditions
- Complete hardware package for a cleaner upgrade path
What’s Included
- Turbochargers
- Exhaust Manifold
- Actuator
- Gaskets
- Oil Pipe
- Water Pipe
- Hardware Kits
- 1 x Turbo Compressor Intake Pipe (Front)
- 1 x Turbo Compressor Intake Pipe (Rear)
Technical Specifications
Part Number: TR-TW2008
Max Power: 800+ HP
Bearing Type: Ball Bearing
Turbine Housing: 10 cm²
Compressor Wheel: 47.0 mm / 58.0 mm
Turbine Wheel: 45.6 mm / 50.0 mm
Power & Setup Note
Power results depend on fuel, calibration, and supporting hardware. The 800+ HP figure reflects capability potential, not a guaranteed result on every vehicle.
For best conversion, add your dyno graph, fuel used, and full supporting-mod list directly below this section.
FAQ
Does this fit the standard F87 M2?
No. This kit is for S55-powered applications only.
Does this fit the F87 M2 Competition?
Yes. The F87 M2 Competition uses the S55 engine.
Does this fit the G87 M2?
No. The G87 M2 uses the S58 engine.
What is included in the kit?
Turbochargers, exhaust manifold, actuator, gaskets, oil pipe, water pipe, hardware kits, and front/rear compressor intake pipes.
How much power can it support?
This kit is designed for builds targeting 800+ HP, depending on setup, fuel, tuning, and supporting modifications.
Built for S55-powered F8X BMWs
Clear fitment. Complete hardware package. 800+ HP-capable twin-turbo upgrade.